Fouled Spark Plugs


| 11/29/2011 2:34:59 PM


Tags: ,

 Keith 

Editor's note: If you’re having trouble with that old Suzuki, BSA or BMW, Keith Fellenstein is your guy. From motorcycle tuning tips to detailed motorcycle engine repair, he can draw from a wealth of experience to help guide you to success. Send questions to: Keith’s Garage, 1503 SW 42nd St., Topeka, KS 66609, or send an e-mail with "Keith's Garage" as your subject.   

Fouled spark plugs 

Q: My 1973 Norton 850 Commando has the annoying habit of fouling spark plugs. What can I do to prevent it?
-Kenneth Peters/Lawrence, Kan. 

A: If this is the first time you’ve fouled a set of plugs, I’d change to projected tip spark plugs of the same heat range and try again. Projected tip plugs have the same thread depth as regular plugs, but the center electrode projects farther out into the combustion chamber. Not far enough to collide with the valves or piston, but out in the fire a little more than a regular plug. Sometimes that’s all it takes to stop fouling plugs. If that doesn’t work, you may want to try one heat range hotter plug.



Finding out why the plug is fouling is also a good idea. Is the fouled plug sooty dry black, indicating a too rich condition, or sooty wet black, indicating oil in the combustion chamber? Sooty dry black can be remedied by adjusting the carburetors to lean out the mixture as needed. You’ll need to determine where in the power band the fouling is taking place; idle, just off idle, mid-range or wide open.

DavidR
4/5/2019 7:10:34 PM

I've got a 1979 honda cb650,it is hard to start with choke pulled out,I'll run it for a while and shut it off and go back out to crank it an hour or two later and the battery is dead. I've bought 2 new batteries and 2 new coils. Any idea on what it might be? Thanx David


gggGary
1/8/2015 10:09:01 AM

I like a solid dose of rust buster in plug holes and down the valve stems, intake, exhaust ports let it sit, add some oil to the holes. Will it start? Run it if it will, start gentle, then head out and RUN it. See what happens, repeat the sequence if needed. You have little to loose trying this if the engine isn't making any funny noises and doing this has avoided a lot of unnecessary overhauls.


KEITHF
12/31/2014 6:03:25 PM

First question, are you testing compression with the throttle held wide open? If not, you are not getting a proper reading. If so, then next I would check valve operation and clearances, though it would be unusual for all cylinders to be equally affected. Looks like you've already at least looked at the valve train. It is possible that the rings are stuck in the piston grooves and not sealing against the cylinder walls, but your oil test should have shown that.




The sound and the fury: celebrate the machines that changed the world!

Motorcycle Classics JulAug 16Motorcycle Classics is America's premier magazine for collectors and enthusiasts, dreamers and restorers, newcomers and life long motorheads who love the sound and the beauty of classic bikes. Every issue  delivers exciting and evocative articles and photographs of the most brilliant, unusual and popular motorcycles ever made!

Save Even More Money with our RALLY-RATE plan!

Pay now with a credit card and take advantage of our RALLY-RATE automatic renewal savings plan. You save an additional $5.00 and get 6 issues of Motorcycle Classics for only $29.95 (USA only).

Or, Bill Me Later and I'll pay just $34.95 for a one year subscription!




Facebook Pinterest Instagram YouTube Twitter

Free Product Information Classifieds

click me